Drawing die options

Several drawing die materials may be available depending on drawing needs. The table below can be used to see which materials are available and the relative durability and price may help you determine the best material to use for your application. Please discuss your drawing needs with an Esteves expert to make sure you use the best and most cost-effective wire drawing die.

 

Nib material TC PCD SSCD ND
 
Size range availability (1)
Min. .005”
[0.127 mm]
.00157”
[0.040 mm]
.00027”
[0.007 mm]
.00027”
[0.007 mm]
Max. n/a 1.378”
[35.0 mm]
.0840”
[2.150 mm]
.0787”
[2.0 mm]
Approx. relative durability (2)
Non-ferrous 1x 50 - 500x 17 - 33x 17 - 33x
Ferrous 1x 8 - 70x 4 - 9x 4 - 9x
Approx. relative price (3)
.0181” [0.460 mm] 1x 3 - 8x 3x 5x
.0394” [1.001 mm] 1x 7 - 8x 15x 15x
.3937” [10 mm] 1x 20 - 26x - -
Physical properties (4)
Elastic modulus 450 - 650 850 - 1150 1120 700 - 1220
Thermal conductivity 100 500 - 600 800 - 2000 300 - 1000
  1. The size range is for indication only. The maximum and minimum size depends on the required drawing die profile. Esteves Group’s Drawing Die Wizard software can be used to check if a certain blank can be used, or ask Esteves Group for guidance.
  2. Relative durability is a comparison to tungsten carbide dies. The durability is for indication only and can differ depending on the drawn wire type, wire condition, lubricant used, and wire drawing conditions.
  3. Relative price is a comparison to tungsten carbide dies. The relative price is for indication only and can differ depending on the tolerance, die geometry, casing size and any other requirements.
  4. Elastic modulus is measured in GPa, and thermal conductivity in W/mK. More information on elastic modulus and thermal conductivity can be found on Wikipedia.
Get Started.

Call now to learn how you can use Esteves ND dies for your fine-wire needs.

Call 1-800-325-7989