TC Drawing Dies

Specifications

Please contact Esteves Group sales to select the best suitable stone size for your specific requirement.

Blank type	Tungsten Carbide
size	R2	R3	R4	R5	R6	R7	R8	R9
Standard die hole diameter (inch) (1)
new die size range	.004 – .106	.008 – .128	.015 – .230	.020 – .280	.025 – .350	.100 – .425	.220 – .516	.310 – .687
Standard casing dimensions (2)
diameter [inch]	1.0 or 1.5	1 or 1.5	1.5	1.5	2.0	3.0	3.0	3.0
height [inch]	.5625 or .75	.75	.75	.875	1.125	1.375	1.75	1.75

Blank type	Tungsten Carbide
size	R10	R11	R12	R14	R15	R16	R17	≥ R18
Standard die hole diameter (inch) (1)
new die size range	.400 – .875	.710 – 1.250	.950 – 1.500	1.225 – 1.750	1.475 – 2.250	1.850 – 2.500	2.225 – 3.000	Please contact Esteves
Standard casing dimensions (2)
diameter [inch]	3.0 or 4.0	3.0 or 4.0	4.0	6.0	6.0 or 7.0	6.0 or 7.0	9.0	Please contact Esteves
height [inch]	2.0	2.25	2.375	2.5	2.5	2.5	3.0	Please contact Esteves

Other sizes are available on request
More casing dimensions are available

Standard product coding	Blank material	Engraving
Standard product coding	Tungsten carbide (TC)

Please contact Esteves Group for any special engraving requirements.

TC Wire Drawing Die Standard Tolerances	Imperial tolerances [inch]		Metric tolerances [mm]
	Diameter	Tolerance	Diameter	Tolerance
	.0061 – .009	+0 / -.0002	0.155 – 0.230	+0 / -0.0051
	.0091 – .052	+0 / -.0003	0.231 – 1.322	+0 / -0.0076
	.0521 – .103	+0 / -.0005	1.323 – 2.618	+0 / -0.0127
	.1031 – .295	+0 / -.001	2.619 – 7.495	+0 / -0.0254
	.2951 – .500	+0 / -.002	7.496 – 12.724	+0 / -0.0508
	.5001 – 1.000	+0 / -.003	12.725 – 25.424	+0 / -0.0762
	1.001 – 7.000	+0 / -.004	25.425 – 177.80	+0 / -0.1016

Tighter tolerances are available when required.

Get Started.

Call now to learn more about Esteves tungsten carbide dies.